Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!


Results 1 to 5 of 5

Thread: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

  1. #1
    Member
    Join Date
    Apr 2014
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    Hey CNCZone,

    I finally got an enclosure for my PCNC 1100 this year and was noticing how many TTS tool holders I have and how much space they take up on my work benches. Earlier this year I starting using pegboards in my shop and wanted to apply a similar theme to holding and organizing my TTS holders; on a rack on the enclosure, within sight and easy access. I started looking around to see if there were any good options and for a while I couldn't find anything I liked. I even went down the road of designing my own TTS rack to fit my enclosure but luckily I got really busy and put the build off. Just before I was about to start building I did one last search and luckily found the TTS rack that Santa Cruz Electronics (SCE) makes and sells. It was actually a review from Bob Warfield (CNC cookbook) where I found out about and so far I'm really excited to get this product and try it out.

    I managed to speak to the owner at SCE and inquired if the shelves could be laser engraved. The reason is that I felt the only option lacking on the rack that SCE sells is to have numbers on each hole so that you can index your tools properly. It turns out SCE has their own laser and they were able to do this for me. Check out the results! I can't wait to get this rack and try it out! If there is enough interest SCE might start offering this as potentially a feature.

    Just thought I would share since I think others might find this to be a really good accessory for their Tormach. I'm really surprised Tormach themselves hasn't started to carry the racks SCE makes.

    Making chips in Canada, CT

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-engraved-tts-holders-jpg  


  2. #2
    Member
    Join Date
    May 2015
    Location
    USA
    Posts
    109
    Downloads
    0
    Uploads
    0

    Default Re: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    I have one of the original tool racks that had acrylic shelves. It works wonderfully.

    Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-sc-rack-jpg

    Attached Thumbnails Attached Thumbnails Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-sc-rack-jpg  


  3. #3
    Member Steve Seebold's Avatar
    Join Date
    Mar 2009
    Location
    USA and proud of it
    Posts
    1875
    Downloads
    0
    Uploads
    0

    Default Re: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    I had an enclosure on my Series II 1100. I had the TTS rack and the monitor rack from Santa Cruz Electronics.

    I sold the enclosure last weekend because when I had the machine in my garage, it was an absolute pain in the ass to get in and clean chips out.

    You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.


  4. #4
    Member kstrauss's Avatar
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    1458
    Downloads
    0
    Uploads
    0

    Default Re: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    There seems to be interest in TTS holder storage so I thought that I'd post a few details of my storage. My enclosure is made of 80/20 aluminum extrusions so it is easy to attach things to the enclosure sides with T-nuts and 1/4-20 screws. I used some leftover 1x2x1/8 aluminum angle to make shelves for the TTS holders. To make it easier to insert/remove the holders the shelves are slightly angled using tapered washers and spacers.

    Attached Thumbnails Attached Thumbnails Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-_dsc9151-jpg   Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-dsc_4467-jpg   Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-_dsc9223-jpg   Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!-_dsc9215-jpg  



  5. #5
    Member
    Join Date
    Dec 2015
    Posts
    434
    Downloads
    0
    Uploads
    0

    Default Re: Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

    I just switched from R8 to TTS which means I'll be making some new racks. My old one was very similar to yours, kstrauss. Looks like I'll be finding some 1x2x1/8 angle for the new setup. The R8 set screw holders without an ATC ring sure made it easy to store a bunch of collets in a small space, but I guess I gained a 10 spot collet rack with the ATC.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!

Awesome TTS tool rack for Tormach enclosure by Santa Cruz Electronics!