Want to take measurements - Tormach 440/770/1100 (any versions), NJ/DE/eastern PA/NY

[Pariel]

As title says, I want to take some measurements from some Tormach machines. I'm located in NJ, willing to travel but would prefer as close as possible. If possible I'd like to perform some disassembly, but it's not strictly required. Happy to provide some compensation or trade some machining for your time.

PM me here or email me: andrew@wcubed.co (not .com).

Similar Threads:

• Need Help!- 1100 way cover measurements
• Measurements on Tormach ATC Tool-holders?
• Tormach 1100 S3 using Tormach 1.5" face mill....
• Solidworks Versions open with what Mastercam versions.
• Newbie- New Tormach 1100 series 3 vs. Old Tormach 1100 series 1 to purchase

[metalmayhem]

If you just need measurements you can download solid models on the tormach website

[Pariel]

Tormach's models don't contain the details I need (related to developing upgrades for their products).

[Pariel]

Also willing to compensate anyone who isn't local to me if they can provide dimensions -- minor assembly required at most, most if not all dimensions are measureable with a 6" caliper.