Full enclosure for PCNC 1100


Results 1 to 3 of 3

Thread: Full enclosure for PCNC 1100

  1. #1
    Member Steve Seebold's Avatar
    Join Date
    Mar 2009
    Location
    USA and proud of it
    Posts
    1863
    Downloads
    0
    Uploads
    0

    Default Full enclosure for PCNC 1100

    I have a full enclosure for my PCNC 1100 Series II that I want to take off my machine and go back to the old splash guard and table chip guard. So here’s my deal.

    If you’ll buy me the splash guard, table enclosure, one work table and pay shipping, and you can have this enclosure.

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2011
    Location
    Santa Cruz, CA, USA
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default Re: Full enclosure for PCNC 1100

    Hi Steve,

    Contact me by PM if you would, as I have extras of these items that you are welcome to, no exchange for your enclosure needed.

    I've tried to send a PM to you several times, but they don't appear to get through successfully.
    Maybe it will work if you initiate the PM.

    SquibLoad



  3. #3
    Member Steve Seebold's Avatar
    Join Date
    Mar 2009
    Location
    USA and proud of it
    Posts
    1863
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by SquibLoad View Post
    Hi Steve,

    Contact me by PM if you would, as I have extras of these items that you are welcome to, no exchange for your enclosure needed.

    I've tried to send a PM to you several times, but they don't appear to get through successfully.
    Maybe it will work if you initiate the PM.

    SquibLoad
    My fault. I seldom check my PM’s on here.

    I would like to work a trade with you. I don’t expect anything for free.

    I have the full enclosure, AND have the TTS rack and your monitor/computer rack. I paid about $2500 for the enclosure and then I spent about $700.00 with you. Ant I really don’t like the enclosure. It’s just too damned hard to get in and clean the machine.

    I’ll give you a call later today or tomorrow.

    You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Full enclosure for PCNC 1100

Full enclosure for PCNC 1100