Y Axis Gib Adjustment Procedure

[RTP_Burnsville]

Hi Guys,

Is there a procedure for adjusting the Y-axis gib other than trial and error? I needed to disassemble the Tormach (1100) for a recent move and now need to reset the gib adjustment.

Thanks,
Robert

Similar Threads:

• Y axis ball screw replacement procedure
• Need Help!- LT15-M all axis zero zet+set limit procedure
• Doosan Lynx 220 LMS-C - "Y" Direction adjustment procedure
• Need Help!- Gettys N360 Servo drive adjustment procedure.
• Axis bypass procedure for diagnosis in 10M

[toyshop]

This video might help

Dave

[RTP_Burnsville]

Thanks, I'll take a look.