I got to laying out the 8" on the table its just not going to work. I even looked at cutting the rear apron off the vise, but no go. It's just to darn big. I'd actually get less useable working envelope if I mounted it. I guess I'll be going with those two 6 inch vises off the Hurco after all. Nice thing about the Hurco is I can push the head in or out or even swivel it to cover every inch of the table, so while the 8 inch will be tight in the enclosure I can machine anything it can clamp. I think I can cover the hole for the handle with the skirt that covers the slides the doors ride on.