Purchase new pcnc1100

[Salman_Tech]

Hello everybody,
I'm totally new here and after reading in the Forums I must say that you guys are amazing.
I'm working on an Aerospace engineering research laboratory and was wondering if buying a new Tormach Pcnc 1100 with 4th axis is a good choice.
Generally, we need the machine for manufacturing small axial compressor rotors (attached picture), It's only for research, not for use in a real jet engine. although it should be made either from 316 Stainless or Titanium-based alloys.
I don't have a lot of CNC machining experience and this is the reason that I chose to ask you guys if you think that the Tormach Pcnc1100 is a good choice for us?
Thanks a lot

Similar Threads:

• PCNC1100 For Sale
• Tormach Pcnc1100
• Newbie- new to me pcnc1100
• Considering selling my PCNC1100
• My first thoughts on my PCNC1100

[AUSTINMACHINING]

Hello everybody,
I'm totally new here and after reading in the Forums I must say that you guys are amazing.
I'm working on an Aerospace engineering research laboratory and was wondering if buying a new Tormach Pcnc 1100 with 4th axis is a good choice.
Generally, we need the machine for manufacturing small axial compressor rotors (attached picture), It's only for research, not for use in a real jet engine. although it should be made either from 316 Stainless or Titanium-based alloys.
I don't have a lot of CNC machining experience and this is the reason that I chose to ask you guys if you think that the Tormach Pcnc1100 is a good choice for us?
Thanks a lot

Without any dimensions, hard to say,

[kstrauss]

Without any dimensions, hard to say,

Plus accuracy and finish requirements.

[Salman_Tech]

The dimensions are: maximum diameter is around 13(inch) and the thickness is 4(inch).
I hope this information will help to give an answer.