Here is an absolutely outstanding set of tutorials about Fusion360.

Fusion 360 Tutorial | Technology Tutorials

They're very basic, but taught from an engineering/drafting fundamentals point of view rather than a do-this-to-get-that perspective. Very well done, highly structured approach, and most importantly, the presenter gets out of the way while demonstrating. About 6-7 hours total. Not aimed at subtractive machining, but a superb first into to Fusion360- far better than any other I've seen. With this series as a first step, the Saunders videos and other technical tutorials are far easier to follow.

Highly recommended.

Similar Threads: