Probe adapter with relief for the Tormach collet and polished it up a bit, also the little fitting for the coil cord entry, looks a bit more professional than the tape ha!
I am trying to figure it out as I know nothing about probing or really how to set it up. I used the probe screen and the ABC settings check out identical with my .0005 indicator that I set initially and both check out.
The Probe came with a 4" approximately length stylus, I ordered a 20 mm from an outfit in California, 24 dollars delivered.
I have 1.7 to 1.9 thou discrepancy checking a bored hole against my .0005 indicator and I am wondering if it has to do with the long probe stylus? Is it logical that the long stylus decreases sensitivity of the probe?
If thats the case then the accuracy should be better with the shorter probe?
EDIT: Q-Mark manufacturing -stylus
Any info appreciated.........