Reply with QuoteLink didn't go to video it downloaded something to my phone? ! Virus? Spam?
Tormach PCNC 440: Telescope Drive Motor Adapter
One of my first parts on the 440. Enjoy. Thanks!
EPISODE 1: TELESCOPE DRIVE MOTOR ENCODER ADAPTER
Similar Threads:
Link didn't go to video it downloaded something to my phone? ! Virus? Spam?
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
Worked fine for me earlier from my laptop earlier.Originally Posted by WOTDesigns
Awall - The Body Armor Dude
CoolCNCStuff_ on Instagram - CoolCNCStuff.com
Is this comment spam?
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
I don't think so!
Wes posts great info on this site. His IT knowledge is extensive and up to date
Some of us are still in the 90's
Oh, Nice video and machined part btw
Whoops is right guess I needed more coffee!
Wrong person lol
Last edited by mountaindew; 02-20-2016 at 11:12 PM.
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
Whoops - WTO and WOT are too close =) This is the real Wes! Video played just fine for me, perhaps WOTDesigns didn't have a compatible browser on his phone so it attempted to download the video binary stream with a garbage name instead?I don't think so!
Wes posts great info on this site. His IT knowledge is extensive and up to date
Some of us are still in the 90's
Oh, Nice video and machined part btw
Btw - Great video! I think once you are more comfortable with the machine, even the 440 can probably take a much larger bite at those feeds!
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
Great video. Not sure why the first 3 attempts tried to download a file. Only clicked a few thousand youtube links without issue and it loads fine now.
Sent from my SM-G900V using Tapatalk
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
Is the 5 inch vise to large for the machine orientated in the y or just for this part? What are the part dimensions?
Sent from my SM-G900V using Tapatalk
Re: Tormach PCNC 440: Telescope Drive Motor Adapter
Hey WOT,
Glad it worked for you. Yeah I had to rotate the vice 90 in order to fit the part. The vice i have is actually a 4inch and it fits fine in both orientations. While I normally have the vice in the 'normal' position, for this part I had to clamp along the x axis for more travel. You'll notice that part is not entirely round, it has two flats so that was so that I could fit it on the machine. In my next episode, the part i'm making is much smaller and I have the vice back to normal. The telescope part is about 6" in diameter.
This was an interesting project to watch. Thanks for sharing
