Problem with Tormach USB recovery stick (1100 s3)

Results 1 to 3 of 3

Thread: Problem with Tormach USB recovery stick (1100 s3)

  1. #1
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Problem with Tormach USB recovery stick (1100 s3)

    Ok my hard drive went down I have the USB from Torrmach and and flashed another drive with it.

    The problem is that when it it booting it pops and error say something like "check the ethernet cable between the pc and controller.

    My machine is using a mesa 5i25 connected to the controller.

    How can I get round this issue ?

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Problem with Tormach USB recovery stick (1100 s3)

    Problem with Tormach USB recovery stick (1100 s3)-img_20220416_092317-jpg



  3. #3
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Problem with Tormach USB recovery stick (1100 s3)

    (Solved)

    I was using the Tormach USB to flash another drive in a different PC to that of the PC on the Tormach
    when I flashed with the USB with the drive in the Tormach PC it found the 5i25



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with Tormach USB recovery stick (1100 s3)

Problem with Tormach USB recovery stick (1100 s3)