Need to change in Pathpilot STEP PER INCHES for axis XYZ

Results 1 to 3 of 3

Thread: Need to change in Pathpilot STEP PER INCHES for axis XYZ

  1. #1
    Member
    Join Date
    Nov 2011
    Location
    Mexico
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default Need to change in Pathpilot STEP PER INCHES for axis XYZ

    where is the INI file in order to change the STEPS PER INCHES for every axis XYZ.

    I want to tweak it sigly in order to measure the accuracy gain.

    I always make this test to my custom made CNC routers to increase the machine positioning precision.




    You can check a video here: https://photos.app.goo.gl/ESgZdMXcHT8r6Cvx7

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2012
    Location
    United States
    Posts
    591
    Downloads
    0
    Uploads
    0

    Default Re: Need to change in Pathpilot STEP PER INCHES for axis XYZ

    ~/tmc/configs/tormach_mill/



  3. #3
    Member vmax549's Avatar
    Join Date
    Oct 2005
    Location
    Lady Lake
    Posts
    1145
    Downloads
    3
    Uploads
    0

    Default Re: Need to change in Pathpilot STEP PER INCHES for axis XYZ

    It will also depend on what model 1100 you have setup as to the exact file.

    (;-) TP



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need to change in Pathpilot STEP PER INCHES for axis XYZ

Need to change in Pathpilot STEP PER INCHES for axis XYZ