Hand Pendant code . - Page 3

Page 3 of 3 FirstFirst 123
Results 41 to 47 of 47

Thread: Hand Pendant code .

  1. #41
    Member kstrauss's Avatar
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    1788
    Downloads
    0
    Uploads
    0

    Default Re: Hand Pendant code .

    It looks great! Will you be making further details available?



  2. #42

    Default Re: Hand Pendant code .

    This is just a prototype. What other functions do you need in the remote control?



  3. #43
    Member kstrauss's Avatar
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    1788
    Downloads
    0
    Uploads
    0

    Default Re: Hand Pendant code .

    I don't have a SlantPro so my interest is a pendant for my 770-3. I'm just looking for ideas particularly with regard to the software that interfaces the pendant to PP.



  4. #44

    Default Re: Hand Pendant code .

    The brand of the machine does not matter. The console will work on any PP machine. You just need to make changes to the code. The remote works via the add-on hidcomp - EMC/LinuxCNC USB HID interface component



  5. #45

    Default Re: Hand Pendant code .

    I connected a 7-inch screen to the remote control. Work in progress.





  6. #46

    Default Re: Hand Pendant code .

    My CNC mill little MPG Pendant Pathpilot for the most necessary functions.
    1.Axis Zero.
    2.Axis SELECT (X Y Z A)
    3.Coolant (ON / OFF)
    4.5-MODE SELECT (CONT, 0.001, 0.01.0.1, 1.0)
    5.Program Start / Resume
    6.Program PAUSE.
    7.Mpg / Encoder 100PPR
    8.Program Stop.
    9.4-Mode SELECT (Override) (Feedhold, Maxvelocity, RPM, JOG)
    10. Reset.
    Works with standard screen resolution 1024x768. Does not require connection via HAL. (There is variate and via Hal. The second system sees as GamePad.) Works on the Pathpilot 1.xxx and 2.xxx versions.



    Attached Thumbnails Attached Thumbnails Hand Pendant code .-fb_img_1640948327149-jpg   Hand Pendant code .-fb_img_1640948332545-jpg  


  7. #47
    Member
    Join Date
    Mar 2009
    Location
    USA
    Posts
    388
    Downloads
    0
    Uploads
    0

    Default Re: Hand Pendant code .

    Quote Originally Posted by Yaryk View Post
    My CNC mill little MPG Pendant Pathpilot for the most necessary functions.
    1.Axis Zero.
    2.Axis SELECT (X Y Z A)
    3.Coolant (ON / OFF)
    4.5-MODE SELECT (CONT, 0.001, 0.01.0.1, 1.0)
    5.Program Start / Resume
    6.Program PAUSE.
    7.Mpg / Encoder 100PPR
    8.Program Stop.
    9.4-Mode SELECT (Override) (Feedhold, Maxvelocity, RPM, JOG)
    10. Reset.
    Works with standard screen resolution 1024x768. Does not require connection via HAL. (There is variate and via Hal. The second system sees as GamePad.) Works on the Pathpilot 1.xxx and 2.xxx versions.

    Looks great! good job...

    Can you provide details on how you implemented this in the pathpilot config? Files maybe?

    Thanks,
    Scott...

    Instructional Videos for CNC Guitar Building
    http://www.rmgvideos.com


Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hand Pendant code .

Hand Pendant code .