- PathPiloto update to 2.6.0
-
Member
PathPiloto update to 2.6.0
I ran into an interesting problem whjile updating from 2.3.6 to 2.6.0 . PathPilot will ONLY load up in demo mode. This is not a tormach machine and each time you update you have to go into the ini and hal files and update the info needed for it to run PathPilot . Otherwise you get the error screen and the option to reset pathpilot. BUT not this time around. I t always loads Demo mode. IT never shows the error screen at all and no option to reset PathPilot to a new config.
Has Tormach made PathPilot to ONLY be useable by a true Tormach Machine ???
(;-) TP
Similar Threads:
Last edited by vmax549; 10-26-2020 at 12:17 PM.
-
-
Member
Re: PathPiloto update to 2.6.0
NOW THAT WAS REALLY ODD. When I updated PathPilot and the PC rebooted it lost the ethernet port. (;-( I guess it is time for some new parts .
(;-) TP
-
Member
Re: PathPiloto update to 2.6.0
I run pathpilot 2.6.0 on a machine that is not a Tormach .
Cant remember if it was 2.5 or 2.6 i did run into trouble where i could not get pathpilot to run.
So i just did a quick back up . reinstall PP 2.0 then got it upgraded to 2.6 . No issues since
- PathPiloto update to 2.6.0
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules