PP din socket for tool setter

Results 1 to 5 of 5

Thread: PP din socket for tool setter

  1. #1
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default PP din socket for tool setter

    PP din socket for tool setter.

    I have a tool setter non Tormach but looks the same mine does not have a led only to switches one for the tool trip and the other NC for the over travel fault.

    I am looking for the connections to this DIN socket for the two switches. I believe pin 1 is 5v dc - pin 4 is common - pin 2 not used - pin5 input - pin 3 is 12v dc

    Similar Threads:
    Last edited by Clive S; 05-04-2020 at 09:35 AM.


  2. #2
    Member
    Join Date
    May 2015
    Location
    USA
    Posts
    111
    Downloads
    0
    Uploads
    0

    Default Re: PP din socket for tool setter

    This is the schematic for the 1100m
    PP din socket for tool setter-5-pin-schematic-png
    PP din socket for tool setter-5-pin-jpg

    Attached Thumbnails Attached Thumbnails PP din socket for tool setter-5-pin-schematic-png   PP din socket for tool setter-5-pin-jpg  


  3. #3
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: PP din socket for tool setter

    Thanks for the info. My machine only has one Din socket. I would have thought that the Tormach setter would have a safety second switch in case the first one fails for some reason

    The same socket is used for different probes

    So I am looking for the correct pins on the din socket to put the switch across



  4. #4
    Member
    Join Date
    Sep 2017
    Posts
    62
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Clive S View Post
    Thanks for the info. My machine only has one Din socket. I would have thought that the Tormach setter would have a safety second switch in case the first one fails for some reason

    The same socket is used for different probes

    So I am looking for the correct pins on the din socket to put the switch across
    Millfast Products advertises adapters that allows two devices to be installed. Depending on the model, they have one for 2 NO switches and a NO/NC version.



  5. #5
    Member
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: PP din socket for tool setter

    Quote Originally Posted by Clive S View Post
    Thanks for the info. My machine only has one Din socket. I would have thought that the Tormach setter would have a safety second switch in case the first one fails for some reason

    The same socket is used for different probes

    So I am looking for the correct pins on the din socket to put the switch across

    With further investigation the pins to use are pin 4 and pin 5 looking at the front I have use NC contacts. So this is now solved thanks to all for the feedback.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PP din socket for tool setter

PP din socket for tool setter