This is the schematic for the 1100m
PP din socket for tool setter.
I have a tool setter non Tormach but looks the same mine does not have a led only to switches one for the tool trip and the other NC for the over travel fault.
I am looking for the connections to this DIN socket for the two switches. I believe pin 1 is 5v dc - pin 4 is common - pin 2 not used - pin5 input - pin 3 is 12v dc
Similar Threads:
Last edited by Clive S; 05-04-2020 at 09:35 AM.
This is the schematic for the 1100m
Thanks for the info. My machine only has one Din socket. I would have thought that the Tormach setter would have a safety second switch in case the first one fails for some reason
The same socket is used for different probes
So I am looking for the correct pins on the din socket to put the switch across