PathPilot and NO run from here function - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 18 of 18

Thread: PathPilot and NO run from here function

  1. #13
    Member
    Join Date
    Oct 2005
    Location
    USA
    Posts
    826
    Downloads
    3
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    " walks through the modal state and applies all the right bits " That is what teh M80 /M81 does. The M80 gatheres the current modal states and teh M81 reapplies them. The G30 gathers teh stopped positions and teh G30 returns to those saved positions.

    So far that combo seems to work well here to be able to RUN FROM HERE..

    NOW that is I only used it to restart from exactly where it stopped at (;-) I have not tried a cold restart and RFH yet. Working on it

    (;-) TP



  2. #14
    Member
    Join Date
    Apr 2017
    Location
    Canada
    Posts
    117
    Downloads
    0
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    Where are M80 and M81 documented? I had never heard of them before.



  3. #15
    Member
    Join Date
    Oct 2005
    Location
    USA
    Posts
    826
    Downloads
    3
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    The M80 gathers teh Modal states and teh G81 reapplies them. BUT they do not gather all modal states as I found out searching thorught teh M80 code , just a few.

    They are some of teh Mcodes that Tormach does not talk about.

    (;-) TP



  4. #16
    Member
    Join Date
    Apr 2017
    Location
    Canada
    Posts
    117
    Downloads
    0
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    Thanks for the quick response, but could you expand on it? Which modal states are saved/restored by M80/M81?



  5. #17
    Member
    Join Date
    Dec 2008
    Location
    Switzerland
    Posts
    630
    Downloads
    0
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    Quote Originally Posted by vmax549 View Post
    ... They are some of teh Mcodes that Tormach does not talk about. (;-) TP
    These are just remapped codes created by Tormach for specific purposes. That's why they say "note this is for INTERNAL USEby Tormach" ... "Not to be release to the public".
    Step



  6. #18
    Member
    Join Date
    Oct 2005
    Location
    USA
    Posts
    826
    Downloads
    3
    Uploads
    0

    Default Re: PathPilot and NO run from here function

    You also have M70/M71 which saves even MORE modal states. There is nothing SECRET about saving modals LinuxCNC has been doing it for a long time now.

    M80 just does not save as many as M70.

    (;-) TP



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PathPilot and NO run from here function

PathPilot and NO run from here function

PathPilot and NO run from here function