Problem Torchmate CAD Accumove patch


Results 1 to 2 of 2

Thread: Torchmate CAD Accumove patch

  1. #1
    Member
    Join Date
    Feb 2016
    Posts
    47
    Downloads
    0
    Uploads
    0

    Default Torchmate CAD Accumove patch

    Has anyone been able to install the add-on driver / .gm post processor on TM CAD V5.0 rev12? The instructions show "install driver" in machine settings. But V5 doesn't have the button. I've tried to rename the driver= in the config settings file to match existing gcode53. But that wouldn't go anywhere but error with the gcode53 driver.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2016
    Posts
    47
    Downloads
    0
    Uploads
    0

    Default Re: Torchmate CAD Accumove patch

    The patch will not work with V5.0 via TM Tech. I upgraded to V9 which patch is preinstalled.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Torchmate CAD Accumove patch

Torchmate CAD Accumove patch