- Accumove 3 Torchmate VFC box iussue
-
Registered
Accumove 3 Torchmate VFC box iussue
I have a problem with my VFC box i think it cant' converting the Arc voltage to a frequencies. on my VMD screen the arc voltage stay 0V with manual and auto is same, so the THC will not working .
Any suggestions ?
Similar Threads:
-
-
Registered
Re: Accumove 3 Torchmate VFC box iussue
The VFC box is polarity sensitive, it will only read voltage in the Auto mode. If in Auto it displays 0 voltage when cutting try swapping the arc voltage wires.
- Accumove 3 Torchmate VFC box iussue
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules