5 axial roll off with radius compensation


Results 1 to 3 of 3

Thread: 5 axial roll off with radius compensation

  1. #1
    AndiKS's Avatar
    Join Date
    Dec 2007
    Location
    Oberösterreich
    Posts
    183
    Downloads
    0
    Uploads
    0

    Default

    Hello


    TopSolid supports the option radius compensation in cycle 5 axial roll off - has anybody aquired any experiences?
    We are currently using iTNC530 and according to our TopSolid partner, we cannot use this option.

    Is that true?

    In my view, iTNC530 is a very good controller and the manual says that it can carry out radius compensation with vectors in TCPM mode....

    I would really appreciate a NC program extract, THANK YOU!!

    Cu
    AndiKS



  2. #2
    Registered lazio182's Avatar
    Join Date
    Apr 2011
    Location
    Delbr?ck
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hello Andi
    No, it’s not possible to use radius compensation in the 4 axial area nor in the 5 axial one.
    ( that the hook exists only shows that radius compensation is in the planning stage)

    Since the V6.12 Version, it’s now possible to use radius compensation with a 3 axial processing- however for this purpose you would need to adjust the postprocessor.

    Kind regards
    Lazio182



  3. #3
    AndiKS's Avatar
    Join Date
    Dec 2007
    Location
    Oberösterreich
    Posts
    183
    Downloads
    0
    Uploads
    0

    Default

    Hello Lazio182!
    Thank you for your answer.
    However I don’t understand why in the PDF "C:ProgrammeMisslerV611localenglishUSTopSolid.pdf" it says the following

    Quotation:
    „It is possible to manage 5 axis diameter tool compensation. Be careful, it is necessary that the
    machine-tool controller knows how to manage this and that the PPs are adapted.“


    Is that an error in the PDF?
    But why would Missler mention this point and include the checkbox in the cycle if it doesn’t work with any controllers?
    Cu
    Andi



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

5 axial roll off with radius compensation

5 axial roll off with radius compensation