Newbie Setup new tool making department


Results 1 to 2 of 2

Thread: Setup new tool making department

  1. #1
    Registered
    Join Date
    Jul 2013
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Setup new tool making department

    Hi All,

    I'm newbie in tool grinder. Currently i'm setting up this department and this is totally new project in my company. i'm less for the information on this and equipment is insufficient for checking/adjust. i'm using Walter Helitronic Basic. All expert, what i need to take note on this project? grinding wheel selection? wheel dressing machine? O.D step down machine?

    thank you.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2018
    Location
    Israel
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by new_grinder View Post
    Hi All,

    I'm newbie in tool grinder. Currently i'm setting up this department and this is totally new project in my company. i'm less for the information on this and equipment is insufficient for checking/adjust. i'm using Walter Helitronic Basic. All expert, what i need to take note on this project? grinding wheel selection? wheel dressing machine? O.D step down machine?

    thank you.
    ANCA or Rollomatic no?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Setup new tool making department

Setup new tool making department