Other etiquettes at Zoller’s pre-setting tools

Results 1 to 3 of 3

Thread: Other etiquettes at Zoller’s pre-setting tools

  1. #1
    Registered wurst17's Avatar
    Join Date
    Nov 2002
    Location
    Cleebronn
    Posts
    141
    Downloads
    0
    Uploads
    0

    Smile

    Hello

    For a long time we’ve been using easy-tag plastic clips for our tool holders. We print etiquettes at our pre-setting tool and glue them onto our data holders.

    But the etiquettes are about 30mm too long.

    May I just lay another roll with smaller etiquettes that fit or is there another possibility?

    Wurst17



  2. #2
    Registered pwwu_de's Avatar
    Join Date
    Dec 2009
    Location
    Wurzen
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    As far I know Zoller offer only two sizes of etiquettes. The second one is smaller than a standard Zoller’s etiquette but it’s neither 30mm shorter. We tried to switch to another etiquette size but without success.



  3. #3
    Registered
    Join Date
    Feb 2007
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Programmers of Zoller make other etiquette formats on request. Certainly they’d let you pay for it!

    Regards, Koller



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Other etiquettes at Zoller’s pre-setting tools

Other etiquettes at Zoller’s pre-setting tools

Other etiquettes at Zoller’s pre-setting tools