Need Help! Surfacing onsrud router table


Results 1 to 2 of 2

Thread: Surfacing onsrud router table

  1. #1
    Activation process rfjr88's Avatar
    Join Date
    Jan 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Surfacing onsrud router table

    I have no idea how to surface my osrud table. I'm use to running multicam routers. Which is pretty easy to surface. I have very little training with this osrud table.

    I have no idea where to start, So any help would be greatly appreciated!!!

    How do I set the height on my MDF?

    C.R. Onsrud M series model # 4100M12
    Using a OSAI controller
    Vcarve Pro


    Thank you,

    Similar Threads:


  2. #2
    Member routalot's Avatar
    Join Date
    Dec 2003
    Posts
    1206
    Downloads
    0
    Uploads
    0

    Default Re: Surfacing onsrud router table

    I just found this post and sympathise with the problem.The best solution I found was to use the pocket feature and to create a vector,just a touch larger than the spoilboard, to indicate the boundary of the cut.Then just create a pocketing routine to the shape and desired depth.It worked for me.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Surfacing onsrud router table

Surfacing onsrud router table