- Need Help!- Surfacing onsrud router table
-
Activation process
Surfacing onsrud router table
I have no idea how to surface my osrud table. I'm use to running multicam routers. Which is pretty easy to surface. I have very little training with this osrud table.
I have no idea where to start, So any help would be greatly appreciated!!!
How do I set the height on my MDF?
C.R. Onsrud M series model # 4100M12
Using a OSAI controller
Vcarve Pro
Thank you,
Similar Threads:
-
-
Member
Re: Surfacing onsrud router table
I just found this post and sympathise with the problem.The best solution I found was to use the pocket feature and to create a vector,just a touch larger than the spoilboard, to indicate the boundary of the cut.Then just create a pocketing routine to the shape and desired depth.It worked for me.
- Need Help!- Surfacing onsrud router table
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules