I've fitted the X-Axis and Y-Axis Limit switches on my Chinese 3020T Mini-CNC and this is the first part of the Z-Axis limit switch installation. This turned out to be trickier than I thought. Here is the link to my fixed1t Youtube video I completed in the early hours of yesterday.

I hope fellow newbies and other with the 3020T will find this useful. In part 2 I'll cover the wiring and setup.

I've create a number of videos on my set up and modifications of the 3020T and put them all in a playlist in fixed1t Youtube, below is the link to the playlist.

fixed1t CNC Knowledge Based Engineering and CADCAM Playlist

I hope somebody finds this helpful.


Similar Threads: