NK105 G2 Recovery instructions
How to recover the system when meet problems? Please follow the instruction:
1. Preparation
z Put the file in English file “EBOOT105.nb0”( version V4.2) into U-disk root directory
z Connect the U-disk to NK105G2 USB port.
2. Repair
Update EBOOT105.nb0 profile
z Power off and reboot NK105 G2 control system, meanwhile “ click ” (menu) key
(press-release-press-release) continuously until the system show “the system repair” interface
z select?1 Update Menu?? z select?2 BOOT? z System shows : Updating BOOT?Read Data……?
z System prompt: Updating Done?Please Reboot?
3. Repair methods
Please do the following below if the NK105G2 control system can’t be started normally (Attention:
don’t insert the U disk which has the file EBOOT105.nb0 into the USB interface.
z Power off and reboot NK105G2 control system, meanwhile “ click ” (menu)
key(press-release-press-release) continuously until the system shows “the system repair
interface” z Select [3 System Repair (OS Can”t start)])
z System prompt : Repairing System?Please Wait……
z System reminds: System repair done?please reboot NK105!?
System repair finished. Please try to use the DSP. If you have any other questions, please contact with
TigerTec engineer.
Engineer mail: support@tigerteccnc.com.cn or info@tigerteccnc.com.cn
TigerTec Team.