Newbie laser chilling


Results 1 to 4 of 4

Thread: laser chilling

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0


  2. #2
    Registered
    Join Date
    Jun 2012
    Location
    Brunei Darussalam
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: laser chilling

    15-20C is what I aim for. I don't know if there is an optimum setting, but I've seen commercial ones run at 8C

    The cooler you can run it, the more power it will put out.



  3. #3
    Registered teyuchillers's Avatar
    Join Date
    Dec 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: laser chilling

    How to adjust the water temperature for CW-5000 water chiller
    CW-5000 chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control.Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
    Firstly, we need to change to constant temperature mode
    1. Press and keep holding ? key and SET buttons
    Then waiting for 5 seconds until 0 displayed
    2. Press ? key to switch to 8 and release the key
    3. Press SET key, and it displays F0
    4. Press ? key to switch to F3
    5. Press SET key and it displays 1
    6. Press ? to adjust to 0
    7. 1 means intelligent control, 0 means constant control
    Now the chiller is working in constant temperature mode to adjust the water temp.
    1. Press SET key and it displays F3
    2. Press ? to adjust to F0
    3. Press SET button into setup status
    4. Press ??buttons to set water temp as you need
    5. Press RST key to save the modification



  4. #4
    Registered teyuchillers's Avatar
    Join Date
    Dec 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: laser chilling

    TO deborahcan2
    It is better to run at 20-30C for the CW-5000 chiller and the refrigeration is the best



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

laser chilling

laser chilling