How the Rotary axis works


Results 1 to 2 of 2

Thread: How the Rotary axis works

  1. #1
    Member
    Join Date
    Feb 2014
    Location
    China
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default How the Rotary axis works

    A rotary attachment is a great help when you need to engrave cylindrical items like glass, mugs, cups etc. And it is also very simple to install the rotary attachment to your thunder laser cutter.

    Just place the rotary attachment on the work table and install the cylindrical item to the rotary attachment and move the laser head to the suitable place and adjust the focus distance.

    Then connect to the socket in the right side of the table and then press the switch to change the axis from Y to rotary axis. Now you can control the rotary attachment through the control panel. And you can press the button again to switch the control from rotary axis to Y axis freely.
    When the job is done, please take out the item carefully.

    Similar Threads:
    www.thunderlaser.com


  2. #2
    Registered
    Join Date
    Jun 2009
    Location
    USA
    Posts
    77
    Downloads
    0
    Uploads
    0

    Default Re: How the Rotary axis works

    I like how it uses the rubber insert to hold the cup and do you have different size rubber to different size cups?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How the Rotary axis works

How the Rotary axis works

How the Rotary axis works