Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters


Results 1 to 3 of 3

Thread: Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters

  1. #1
    Member
    Join Date
    Feb 2014
    Location
    China
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters

    Hi guys, this is ken from Thunderlaser.

    We learned how to deal with a photo from last lesson, now let’s see how to set the parameters for engraving before sending the file to your laser cutter.

    Double click the layer to popup the layer parameter dialog. Set the “is Output” as Yes. Then set the engrave speed as 700.

    Then set the processing mode as “Scan”. In fact, we can only select “scan” mode if we use a BMP.

    Now set the engraving power. Usually, for engraving, we will set the min power and max power the same.

    If you didn’t’ tick “Invert color” in the last step, you can tick “Negative Engrave” here when engraving a transparent material.

    For scan mode, you can select X_swing to get a faster speed. If you need to get a better engraving quality, you can select X_unilateralism.

    Now we can set the interval. The Interval means the resolution of the engraving. The smaller the interval, the higher the resolution. Usually we will set the interval between 0.08 and 0.04. Now we can click ok and send the file to the laser cutter.



    And that’s all for today. See you.http://www.thunderlaser.com/video/ho...arameters.html

    Similar Threads:
    www.thunderlaser.com


  2. #2
    Member
    Join Date
    Feb 2014
    Location
    China
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters



    Last edited by AmyThunderlaser; 12-30-2015 at 02:30 AM.
    www.thunderlaser.com


  3. #3
    Registered mgtuts's Avatar
    Join Date
    Mar 2017
    Location
    Azerbaijan
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters

    Hi everyone. If anybody interested in Laser and CNC machine software education then you can visit to MGtuts.com

    Artcam 2017 video course at MGtuts.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters

Laser cutter software RDworks v8 tutorial 11 How to Set Engraving Parameters