Eric,
This is a gantry 027 or 130 or similar, the number varies based on the working size of the machine.
Were you able to get a hold of the pc/control card?
Regards,
Eric
I’d like to try to find the model and any information about her thank you!
Similar Threads:
Eric,
This is a gantry 027 or 130 or similar, the number varies based on the working size of the machine.
Were you able to get a hold of the pc/control card?
Regards,
Eric
Eric Feldman - Design Engineer, Programmer
Armor CNC - http://www.armorcnc.com Support hours: 7am thru 10pm EST, 7 days a week
I was gifted a similar machine but without the PC Card. I decided to fit new steppers and UCCNC control after seeing the price to replace the card. I still have the servo motors, wiring harness and drivers but didn't find a control solution within my budget at the time. There were solutions to the +-10v analog control without the original PC but I didn't have the confidence to spend and try them out. Also I didn't know for sure if all my drivers were still in working order anyways. Hope you find what you need!
Cheers from British Columbia
Wasn't this a forerunner to the Techno-Isel machines? I believe there are others out there that may still offer support. Good luck in your search.
Eric Feldman - Design Engineer, Programmer
Armor CNC - http://www.armorcnc.com Support hours: 7am thru 10pm EST, 7 days a week