ISEL stepper question


Results 1 to 2 of 2

Thread: ISEL stepper question

  1. #1
    Activation process cncneon's Avatar
    Join Date
    Aug 2018
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default ISEL stepper question

    Still in the evaluation stage trying to figure out if I can get what I have working and the best way to go about it.
    Once you have the housing off the steppers you have 10 wire coming out of mtr + a ground.
    There are 8 wires that pair up to 4 pins in the connector. Does this indicate a 5 phase stepper?
    Would I be better off just replacing these with a NEMA 34 midrange torque mtr?
    Thanks for any help
    cncneon

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: ISEL stepper question

    Just you need these 8 wires that you mention.

    in each pair dont use the white color wire and use another wire in that pair.

    then you will have stepper with only 4 wires and you can connect it regularly.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ISEL stepper question

ISEL stepper question

ISEL stepper question