- ISEL stepper question
-
Activation process
ISEL stepper question
Still in the evaluation stage trying to figure out if I can get what I have working and the best way to go about it.
Once you have the housing off the steppers you have 10 wire coming out of mtr + a ground.
There are 8 wires that pair up to 4 pins in the connector. Does this indicate a 5 phase stepper?
Would I be better off just replacing these with a NEMA 34 midrange torque mtr?
Thanks for any help
cncneon
Similar Threads:
-
-
Member
Re: ISEL stepper question
Just you need these 8 wires that you mention.
in each pair dont use the white color wire and use another wire in that pair.
then you will have stepper with only 4 wires and you can connect it regularly.
- ISEL stepper question
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules