Cnc router


Results 1 to 3 of 3

Thread: Cnc router

  1. #1


  2. #2

    Default Re: Cnc router

    When you generated your G&M code did you select the correct post-processor? If you are using a program like VCarve, you have to select your corresponding machine/manufacturer so that it outputs the code in the correct format (I am oversimplifying this a bit).



  3. #3
    386281's Avatar
    Join Date
    Oct 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Very new to CNC spork What sort of CNC bit would be best to drill a large number of 1/8 inch holes in copper? I am making a 20 foot long by 8 inch wide cover for one of the gutters on my house.



  4. #4
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: Cnc router

    Use a drill bit for that.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cnc router

Cnc router