Working on Taig Tools Video Series - feedback welcome!


Results 1 to 4 of 4

Thread: Working on Taig Tools Video Series - feedback welcome!

  1. #1
    Registered
    Join Date
    Oct 2010
    Location
    US
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Working on Taig Tools Video Series - feedback welcome!

    I'm working on some Taig videos and wanted to share and get feedback from users. The two I have created so far are on youtube and targeted at new lathe users. Any and all advice is welcome (as well as any ideas for future vids). Thanks! -Keith

    Here is the 2nd video:

    Similar Threads:


  2. #2
    Registered CS900's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    512
    Downloads
    0
    Uploads
    0

    Default Re: Working on Taig Tools Video Series - feedback welcome!

    great job. I think this will be helpful not only to those who want to learn to use their taigs, but also for people interested in buying one to see what the capabilities of the machine really are. That would be a great video as well, see the max MRR you can get in different materials.

    My only comment would be on the top down camera view. The OCD in me would want to see that rotated 180 degrees so that the spindle is on the left of the shot. I think that gives a better perspective of what you'll actually see when you walk up to the lathe



  3. #3
    Registered
    Join Date
    Oct 2010
    Location
    US
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Working on Taig Tools Video Series - feedback welcome!

    Thanks CS900! Appreciate the feedback and suggestions. I plan to flip the video as you mention in the next video. I don’t know why I didn’t do that in this one... I like the idea of demonstrating max MRR and various capabilities too - was considering a demonstration of Max stock size as well, which is a common question and trickier to answer than it seems (over cross slide, facing only, max length on either scenario, etc).



  4. #4
    Registered
    Join Date
    Oct 2010
    Location
    US
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Working on Taig Tools Video Series - feedback welcome!

    3rd Video is up - includes many suggested changes!





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Working on Taig Tools Video Series - feedback welcome!

Working on Taig Tools Video Series - feedback welcome!