Installing T-Track


Results 1 to 3 of 3

Thread: Installing T-Track

  1. #1
    Member rfhall50's Avatar
    Join Date
    Apr 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Installing T-Track

    Folks ...

    Getting ready to install T-Track in my Wasteboard. Simple question:

    Do y’all set the track even with the wasteboard height ? Or maybe lower to allow for resurfacing ?

    Thank you for your help.

    Bobby

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5110
    Downloads
    0
    Uploads
    0

    Default Re: Installing T-Track

    Yes.

    Andrew Werby
    https://computersculpture.com/


  3. #3
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    565
    Downloads
    0
    Uploads
    0

    Default Re: Installing T-Track

    I'd set them lower to allow ressurfacing.
    I'm going to secure the T tracks to my Aluminium table and then mount spoil board 'strips' inbetween each track. That should make them easier to replay when needed.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Installing T-Track

Installing T-Track

Installing T-Track