Pros and Cons of Using Dual Z Axis Drive


Results 1 to 13 of 13

Thread: Pros and Cons of Using Dual Z Axis Drive

  1. #1
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Pros and Cons of Using Dual Z Axis Drive

    I haven't seen too many examples of this configuration and I was just wondering why?
    Is it too complex, not overkill?
    On first thougth, it seems to have alot going for it, besides the cost of extra components.
    The spindle mount would be very simple with the minimum of overhang and one could have a longer Z axis to allow for higher jobs.

    Have I missed something obvious?....

    I hope to be building a T Slot Router one day and I would like to know if this is a viable option.
    Your thoughts?
    Steve

    Similar Threads:


  2. #2
    ericks
    Guest

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Interesting idea....not something i would do



  3. #3
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Why?..too complex and/or expensive?



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Pro's and Cons depend on what you are comparing it to. A single spindle machine, or an ATC machine.

    Pro's:
    If most of your work only requires 2 tools, then it's much faster than a single spindle machine, and even an ATC machine.

    It's slightly to a lot cheaper than an ATC, depending on the ATC spindle you choose.

    Con's:
    You need two of everything.
    Two leadscrews. Two sets of linear rails. Two spindles. Two steppers or servos, and two drives. Two VFD's*.

    It's twice as heavy.

    It's bigger, requiring a longer gantry.

    Chinese ATC's can now be found for as low as $1500, but when you add toolholders and everything else you need for an ATC, you'll usually be at about $3000 or more.

    A dual Z axis can be done for less than $1000.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    ericks
    Guest

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Quote Originally Posted by Sterob View Post
    Why?..too complex and/or expensive?
    I guess it's because i like to keep things simple....not saying it's bad cause i have not looked into it. I just did not ever consider doing something like that



  6. #6
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Quote Originally Posted by ger21 View Post
    Con's:
    You need two of everything.
    Two leadscrews. Two sets of linear rails. Two spindles. Two steppers or servos, and two drives. Two VFD's*.
    .
    Sorry, I tried to find a pic of what I was thinking about but couldn't find one.
    My idea was to raise and lower the Gantry with a stepper at each end of the gantry instead of raising and lowering the Spindle.
    One spindle and one VFD.

    But you are correct....twice as many linear rails , ball screws, steppers and drivers.......



    and still have dual Y axis as well...lol


    Steve



  7. #7
    ericks
    Guest

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    I have a feeling i might build a big machine in the near future....something that can handle full sheets..2.4 x 1.2 m



  8. #8
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Oh, I thought you meant dual spindle, but you're talking about a gantry that moves up and down.

    Not sure any benefits would outweigh the cons. Much more weight to move up and down, and more money. And the only benefit is more gantry clearance?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  9. #9
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    6248
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Hi - Some large scale 3D printers do this. But for a router I think it would increase the wobble factor. The gantry is on two rails and as it moves one side leads the other then the other side catches up. This occurs no matter the drive system. The elastic properties of the system dictate this. It's sort of a slip/stick mechanism. So you will have horizontal and vertical stick/slip occurring exaggerating the wobbles of the structure. I think the cons win... Ericks keep an eye on Maximus it will be real soon...Peter



  10. #10
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Quote Originally Posted by ger21 View Post
    Oh, I thought you meant dual spindle, but you're talking about a gantry that moves up and down.

    Not sure any benefits would outweigh the cons. Much more weight to move up and down, and more money. And the only benefit is more gantry clearance?
    Less Spindle overhang and simpler Spindle mount as well , but I see what you mean.
    The complexity and cost do not justify the possible gains.

    It was just a thought.....lol



  11. #11
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Careful design can also minimize spindle overhang.

    And your just shifting the Z axis ballscrew somewhere else, and doubling it. Make one part simpler, and two parts more complex.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  12. #12
    Member Sterob's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    626
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    Quote Originally Posted by ger21 View Post
    And your just shifting the Z axis ballscrew somewhere else, and doubling it. Make one part simpler, and two parts more complex.
    Yes, there is that.....

    Its a complex issue....



  13. #13
    Member
    Join Date
    Aug 2017
    Location
    United States
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default Re: Pros and Cons of Using Dual Z Axis Drive

    I actually made my first Openbuilds machine with this design, for the same reasons you listed.

    In my case, while it worked, the design of the gantry wasn't strong enough for its height. I'd like to try it again someday, but only as a thought experiment. I've gone on to a much stronger standard-gantry system now.

    Having said that, if I had a market for something that needed a large Z travel I might very well try it again. It does solve a few problems but really only in a narrow use category.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Pros and Cons of Using Dual Z Axis Drive

Pros and Cons of Using Dual Z Axis Drive