- post processors?
-
Registered
post processors?
What CAM programs have post processors that will work for the Syil X4 Plus and C6 lathe?
Similar Threads:
-
-
Registered
Syil recommends using Mach3 to control the mill and there are many CAD/CAM platforms that support Mach3. You could probably get a much more complete list if you post on the ArtSoft forums but I know that there are posts that work with BobCad, CamBam, FeatureCAM, MasterCam, VisualMill, etc.
-
Gold Member
I really like SheetCam. It has been evolving and has been very well supported for the few years I have had it licensed. Les is also coming out with a totally new design. Sheet Cam TNG. It has some nice features already as well and promises to be even better.
I have Mesh Cam for the 3D side. I don't yet use it much, but have played with it. It is very capable as well.
Vectric software has some nice programs. They are a little spendy, but everyone says they are well worth the price, so not really spendy. I have played some with the trials and they are pretty sweet.
-
Registered
Try bobcadcam, they will do post procesors for bobcad users.
-
Registered
I use the Dolphin PartMaster Level 3 Milling package with my SX3 and they have a couple of post processors for Mach2/3 that work fine. I am also now using the Vectric
Cut2D program that is working fine with the SX3 controlled by Mach3. Not sure what programs come with post processors for both the mill and the lathe, and I know Dolphin has a seperate program for the Lathe.
Regards,
-
Registered
We worked together with Syil to specialize a post that is 100% perfect. Dolphin supplies both a Mill and Lathe post.
-
Registered
ahh, ok so I don't need a specific post for the Syil as long as the CAM software has a post for Mach3?
-
Saludos agradecería mucho a quien me pueda suministrar un posprosesador de mach3 para Mastercam X7
-
posprosesador de mach3 para mastercam x7
Saludos agradecería mucho a quien me pueda proporcionar un posprosesador de mach3 para Mastercam X7
- post processors?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules