post processors?


Results 1 to 9 of 9

Thread: post processors?

  1. #1
    Registered john_t_h's Avatar
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default post processors?

    What CAM programs have post processors that will work for the Syil X4 Plus and C6 lathe?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2007
    Location
    USA
    Posts
    93
    Downloads
    0
    Uploads
    0

    Default

    Syil recommends using Mach3 to control the mill and there are many CAD/CAM platforms that support Mach3. You could probably get a much more complete list if you post on the ArtSoft forums but I know that there are posts that work with BobCad, CamBam, FeatureCAM, MasterCam, VisualMill, etc.



  3. #3
    Gold Member LeeWay's Avatar
    Join Date
    Jun 2004
    Location
    United States
    Posts
    6618
    Downloads
    2
    Uploads
    0

    Default

    I really like SheetCam. It has been evolving and has been very well supported for the few years I have had it licensed. Les is also coming out with a totally new design. Sheet Cam TNG. It has some nice features already as well and promises to be even better.
    I have Mesh Cam for the 3D side. I don't yet use it much, but have played with it. It is very capable as well.

    Vectric software has some nice programs. They are a little spendy, but everyone says they are well worth the price, so not really spendy. I have played some with the trials and they are pretty sweet.

    Lee


  4. #4
    Registered
    Join Date
    Mar 2008
    Location
    UK
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Try bobcadcam, they will do post procesors for bobcad users.



  5. #5
    Registered metalworkz's Avatar
    Join Date
    Oct 2006
    Location
    Modesto, CA U.S.A.
    Posts
    975
    Downloads
    0
    Uploads
    0

    Default

    I use the Dolphin PartMaster Level 3 Milling package with my SX3 and they have a couple of post processors for Mach2/3 that work fine. I am also now using the Vectric
    Cut2D program that is working fine with the SX3 controlled by Mach3. Not sure what programs come with post processors for both the mill and the lathe, and I know Dolphin has a seperate program for the Lathe.
    Regards,

    Regards,
    Wes


  6. #6
    Registered Dolphin USA's Avatar
    Join Date
    May 2007
    Location
    USA
    Posts
    428
    Downloads
    0
    Uploads
    0

    Default

    We worked together with Syil to specialize a post that is 100% perfect. Dolphin supplies both a Mill and Lathe post.

    Dolphin CAD/CAM Support


  7. #7
    Registered john_t_h's Avatar
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default

    ahh, ok so I don't need a specific post for the Syil as long as the CAM software has a post for Mach3?



  8. #8
    javitas's Avatar
    Join Date
    Nov 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Saludos agradecería mucho a quien me pueda suministrar un posprosesador de mach3 para Mastercam X7



  9. #9
    javitas's Avatar
    Join Date
    Nov 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default posprosesador de mach3 para mastercam x7

    Saludos agradecería mucho a quien me pueda proporcionar un posprosesador de mach3 para Mastercam X7



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

post processors?

post processors?