Just adding more pictures
I really need some help with this new cnc I just picked up.
Trying to get it running with Mach 3 but I’m having no luck at all, the bob is connected to my pc with a uc100, ive done all the installations correctly and I get both led’s when it’s connected.
The problem is setting up the motor outputs, I have no idea what pins are for what because I have no documentation. If anyone has any ideas please let me know.
Thanks
Similar Threads:
- Syil X3 CNC No movement from steppers or Spindle
- Need Help!- 3 Axis CNC Mill Software for PC - Checking Axis Movement
- Power Drawbar/prototype ATC Syil China/ Syil Canada/ Syil North America
- new retractable 56,000 Air spindle, Syil China / Syil Canada / Syil North America
- Jerky Movement - Syil X3 Mach 3
Look here...
https://www.cnczone.com/forums/syil-products/409310-cnc-post2399092.html#post2399092
Probably something wrong in Emergency Stop wiring. The silly spindle cover switch is the first place to look.
Also aging ES switch contacts get crappy, too. Add a 0.1uF cap across the switch to keep it clean.
Only use ES in emergency. High surge currents in motor drive board occur when ES released after a stoppage.
NEVER use it to just stop the machine. You WILL be sorry, in time.
Last edited by neilw20; 06-14-2021 at 12:19 AM. Reason: More information from stale brain.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!