Syil CNC SX3 spindle interface board


Results 1 to 4 of 4

Thread: Syil CNC SX3 spindle interface board

  1. #1

    Default Syil CNC SX3 spindle interface board

    Hi all,

    I have a Syil SX3 cnc mill and am wondering if anyone come across a schematic for the spindle interface? board, the "cheater" board that feeds spindle driver board, switches modes from cnc to manual and controls appliance relays? I want to put together a complete set of drawings but can't seem to find this one. I have the schematics for the BOB, spindle driver w/daughter board (Thanks Neil) and the display board and it would be nice to complete the set!

    Thx, Dave



  2. #2
    BobFitch's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Syil CNC SX3 spindle interface board

    Hi Dave,
    Slightly off topic however
    Whatever you do do not go to Arceurotrade and admit that you have a Syil machine for spares. I burnt out a power board and the touch pad board when the depth gauge caused a short. As I could not find spares I decided to go over to Sieg boards. Arceurotrade knew I had a Syil machine from past correspondence and refused to sell them and cancelled my payment with no valid explanation. They do sell compatible parts of value just don't mention Syil. Answer was to go direct to China and buy direct from their supplier. The wait is inconvenient and they have lost any future trade from me!



  3. #3
    BobFitch's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Syil CNC SX3 spindle interface board

    Hi there to make amends for the rant.
    I have the drawing you require but it is too large to transfer. Shrunk down it is unreadable.
    Is there anyway to PM me.
    Bob



  4. #4

    Default Re: Syil CNC SX3 spindle interface board

    Thanks Bob, I'll PM you.
    Dave



  5. #5

    Default Re: Syil CNC SX3 spindle interface board

    Quote Originally Posted by BobFitch View Post
    Hi there to make amends for the rant.
    I have the drawing you require but it is too large to transfer. Shrunk down it is unreadable.
    Is there anyway to PM me.
    Bob
    Hi Bob, it appears your PM is set to off. If you enable it I will PM you about theSyil board schem.
    Dave



  6. #6
    tonniedorie's Avatar
    Join Date
    May 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Syil CNC SX3 spindle interface board

    ik had ook graag een schema van een sx3
    a.peeters19@chello.nl



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Syil CNC SX3 spindle interface board

Syil CNC SX3 spindle interface board