Syil Spindle Still No Bueno -


Results 1 to 13 of 13

Thread: Syil Spindle Still No Bueno -

  1. #1

    Default Syil Spindle Still No Bueno -

    Hey All,

    I'm at my wits end with this Syil X4. I've had the spindle board rebuilt, still no movement. Vid here on where I'm at:



    At this point I'd be happy to replace the spindle control (and motor if necessary) Anyone PLEASE!!! Help!

    Anything I haven't tried with my current set up?

    Anyone who has replaced all the guts in your Syil X4?

    Please hook a brother up

    Thanks,

    CE

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    325
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    duplicate post



  3. #3
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    325
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    Do you have a photo of the controller card?

    Is it an XMT_DRIVER_1500 like this one?

    https://www.cnczone.com/forums/bench...-sx4-bldc.html



  4. #4
    Member neilw20's Avatar
    Join Date
    Jun 2007
    Location
    Australia
    Posts
    3739
    Downloads
    0
    Uploads
    0

    Default

    Pictures of PCBs so I know which of the many versions you have. I hAve most if the schematics.
    Your problem is in the big motor controller PCB.
    Can be a simple as e-stop lockout. Most wiring is failsafe so any broken wire will kill it.
    As your display and buttons work small parallel port board and front panel are good.

    Pictures please.

    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!


  5. #5

    Default Re: Syil Spindle Still No Bueno -

    Neil and Maxspongebob,

    I was hoping you guys would show up! You both have tried to help me before. In fact in the last thread someone recommended the guy I sent the board to for rebuild

    Syil Spindle Still No Bueno --img_20190724_104404721-jpg

    Previous thread.

    https://www.cnczone.com/forums/syil-...ive-motor.html



  6. #6

    Default Re: Syil Spindle Still No Bueno -

    When I had everything pulled out that went to the rebuilder....


    Syil Spindle Still No Bueno --img_20190725_101411941-jpg

    If any close up shots will help I can take more pics

    Thank you!



  7. #7
    Member neilw20's Avatar
    Join Date
    Jun 2007
    Location
    Australia
    Posts
    3739
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by lockbuilder View Post
    When I had everything pulled out that went to the rebuilder....


    Syil Spindle Still No Bueno --img_20190725_101411941-jpg

    If any close up shots will help I can take more pics



    Thank you!
    I believe your safety relay on main board won't be closing.
    If that is the case you won't have any voltage on the big electrolytics. Be careful. All this stuff is at mains potential.
    I don't have a schematic of your version.
    What is the psrtnumber(s) on all of the boards.

    Each version the idiots got from east-crystal are different because no proper specs for machine. EC don't care, 'cos they they just charge for development cycle again. The rot continues.

    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!


  8. #8

    Default Re: Syil Spindle Still No Bueno -

    Hey Neil,

    The big board at the bottom is:

    Honcar HBLC-1100-300H-S0018A
    Power Main Board Ver 1.0 2012.05.18

    The little board at the top is:

    Tonman PCF12171 Rev. 1.1

    Thank you!

    Chris E.



  9. #9

    Default Re: Syil Spindle Still No Bueno -

    Oh and the A is in parens.......

    Honcar HBLC-1100-300H-S0018(A)

    sorry,

    CE



  10. #10
    Member neilw20's Avatar
    Join Date
    Jun 2007
    Location
    Australia
    Posts
    3739
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    Sorry. Don't recognize any of those numbers.
    Try this: Closest I could find. Look at page 41. Get the Estop wiring correct.

    Ref:

    https://manualzz.com/doc/6958602/x4-plus---syil-america-bench-top-cnc-mills




    Attached Files Attached Files
    Last edited by neilw20; 06-02-2020 at 10:38 PM. Reason: Attached PDF
    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!


  11. #11
    Member Stifffy's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by neilw20 View Post
    Sorry. Don't recognize any of those numbers.
    Try this: Closest I could find. Look at page 41. Get the Estop wiring correct.

    Ref:

    https://manualzz.com/doc/6958602/x4-plus---syil-america-bench-top-cnc-mills


    Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.

    Thanks.

    Sent from my Pixel 3 using Tapatalk



  12. #12
    Member neilw20's Avatar
    Join Date
    Jun 2007
    Location
    Australia
    Posts
    3739
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by Stifffy View Post
    Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.

    Thanks.

    Sent from my Pixel 3 using Tapatalk
    Your pm box must be full. It blocked my send.
    neilw21 at y7mail • com

    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!


  13. #13
    Member Stifffy's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by neilw20 View Post
    Your pm box must be full. It blocked my send.
    neilw21 at y7mail • com
    Emailed you mate

    Sent from my Pixel 3 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Syil Spindle Still No Bueno -

Syil Spindle Still No Bueno -

Syil Spindle Still No Bueno -