Need Help! Blown Syil spindel controller


Results 1 to 2 of 2

Thread: Blown Syil spindel controller

  1. #1
    Registered
    Join Date
    Nov 2009
    Location
    switzerland
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Blown Syil spindel controller

    Hello
    I have a blown Syil Xp5 spindel controller. I want now to replace the controller with a servo controller and a new motor with higher torque.
    In order to have the same functionality (rpm, spindel start, stop, cc, cl) I have to interface the existing signal. I do not understand all of the function
    of the syil board.

    Conector on blown board: 15V | 5V | NC|NC|DIR|PWM|GND in some manual (www.hipoo.cn) on the net I found for some simlar
    card: 15V|5V|TAP|S/P| F/R|PWM|GND

    TAP: external electric low level, the tapping function is available. When motor runinng at 500rpm/m, high power or open, tapping function invalid.
    I do not understand that!

    S/P: Start/Stop in the shutdown state to a negative pulse start, turned down in a negative pulse stopped, a negative pulse every time a status change.
    I don't understand. What happens?

    F/R: is clear should be 0.6V or 0V.

    PWM: Have to convert that to 0-10V (What's best?)

    could anybody help?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2013
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default Re: Blown Syil spindel controller

    Hi,
    most AC servos and drives hav a velocity mode. It allows you to apply an analogue -10v-+10V signal
    and the servo motor will run at a given speed.

    You would have to make a simple circuit to implement the +10-10 signal, +10 is FWD and -10 is REV.

    https://store.dmm-tech.com/

    Craig



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Blown Syil spindel controller

Blown Syil spindel controller