Well, it is nice to see someone is there!
You should be aware that I have sent a few emails to yourselves and never got a reply - mainly asking about spares.
I hope your investment includes after sales support.
Matt
Hi, Every Syil Users, Long time not log in on the cnczone , during last some years we have big change and progress for CNC machine tools business,
we mostly become the biggest CNC machining center OEM/ODM manufacturer in China, and now we also invest much more on the small CNC machines.
if anybody looks our webpage Affordable CNC Machine | Best CNC Machines | Personal CNC | SYIL will see different.
so I would like if see someone could help us with some content construction who have SYIL machine, and I would interesting have a talk and if any good suggestion and advise for us, will be more helpful too.
my direct email address is sales@syil.com.cn
Our Instagram address is SYIL MACHINE CORP (@cnsyil) ? Instagram photos and videos and welcome everyone to have a look...to see our growth and good share..
have a good day.
Syil Machine Corp Team.
Similar Threads:
Direction,Commitment,Follow through
Well, it is nice to see someone is there!
You should be aware that I have sent a few emails to yourselves and never got a reply - mainly asking about spares.
I hope your investment includes after sales support.
Matt
what model you need spare parts,let is fix it ..
Direction,Commitment,Follow through
Hi,
It is a bit late now.
I ordered an LCD panel from china and soldered an edge connector to it and now that bit works.
The gas strut was replaced with assistance form guys on here.
Are you offering any pneumatic tool change options?
Matt
Not sure what you mean by this. I have sent an email to sales@syil.com.cn
Machine is an X4+ (oldish)
Regards, Matt
Like Matt, I am surprised how poorly the response is to customer inquiry, I have been waiting on replies to my emails for months, my X4+ is down still and I have set my mind on gutting it and starting over using a Centroid Acorn. I sent the attached pictures and requested the wiring diagram as I had to replace one of the drives for the X axis, and regrettably left my documentation on the seat in front of the machine, we had a flood hit where I live and I lost my documentation though the machine didn't get wet thankfully. However I have some low voltage wiring that I am unsure of.
I have emailed several times asking for any available documentation on the following boards,
East Crystal PCF07483 Rev 1.1 and 08094 rev 1.1
East Crystal 07434 ver 1.4
Syil M&C SL-1100-1 (5.1)
2008.8.4
I have very little faith that I will come to a solution to the problem with the current configuration, the support for older machines is very limited and I understand there has been revision to the machines. I have one of the first X4+ machines (110 Volt and no electronics cabinet). I would at least like support on the Spindle board, as it was clearly in house.
Any help from anyone would be appreciated,
Not sure. Will check tomorrow if the snow has subsided!!
Matt