What Back Turn Tools do you prefer?



Results 1 to 2 of 2

Thread: What Back Turn Tools do you prefer?

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    United States
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default What Back Turn Tools do you prefer?

    We run a number of Nomura Swiss machines from 13mm to 25mm and have always used primarily the SCHR style of Iscar back turn tools on most of them. We use Mitsubishi for a deep cut back turn tool. 90% of our parts are 303SS. I was interested in what back turn tools most people use and why? Some important factors for us are:

    1. Insert availability in the US
    2. Performance in 303SS
    3. Life of the insert
    4. Cost of the insert per corner (the Iscar is a double ended insert)
    5. Width of insert for minimum loss of material due to width of back turn when turning to end of part and extending cut for width of part off tool.

    Any help would be appreciated - we are self-taught and can certainly benefit from someone with more experience. Thanks for any input.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2011
    Location
    usa
    Posts
    353
    Downloads
    2
    Uploads
    0

    Default Re: What Back Turn Tools do you prefer?

    where i work we us utilis multidex 3000 there is a good variety of inserts and grades and the inserts have their on location pocket that if the whole end of the insert breaks you can still us the other side with no problems
    the 1600 version looks about the same as the iscar ones



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

What Back Turn Tools do you prefer?

What Back Turn Tools do you prefer?