Star VNC 32 Overtravel in middle of travel



Results 1 to 4 of 4

Thread: Star VNC 32 Overtravel in middle of travel

  1. #1
    Member
    Join Date
    May 2012
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Star VNC 32 Overtravel in middle of travel

    The X axis is alarming OT002 in the middle of the travel. It is a Fanuc 10. Any help is appreciated,.

    Similar Threads:


  2. #2
    Member freakycnc's Avatar
    Join Date
    Apr 2012
    Location
    USA
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default Re: Star VNC 32 Overtravel in middle of travel

    pfmn95492,
    You're sure your parameters for OT are set correctly?
    Two potential ways on a 10 control depending on sys software. 1) Hold "P" and "CAN" while powering up. You'll get no confirmation that it did anything until you move it and have no OT alarms.
    2) Need to get into IPL menu to shut off OT before Zero Return. Hold (-) and (.) while powering up and you will have the IPL menu. Look for "SETTINGS" (menu item 4??) , say "YES", exit and power up.



  3. #3
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Star VNC 32 Overtravel in middle of travel

    Check your reference switches



  4. #4
    Member
    Join Date
    May 2012
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Star VNC 32 Overtravel in middle of travel

    Apparently the X axis is slowly sinking when turned off. That's probably why it loses its position. Does anyone have any ideas what we'll need to fix to keep it from moving when off?

    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Star VNC 32 Overtravel in middle of travel

Star VNC 32 Overtravel in middle of travel