CNC Crash


Results 1 to 4 of 4

Thread: CNC Crash

  1. #1
    Perverson's Avatar
    Join Date
    Apr 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Exclamation CNC Crash

    Hello everyone,
    I had a minor crash from which it resulted a big problem.
    The sub-spindle collided with a tool post and now it is not centered with the main-spindle.
    I've checked with 2 calibrated bars of 4 mm diameter and set them apart by 0.25 mm but I managed to insert a 0.6 mm plate between the bars, so they are approximately 0.35 mm apart.
    Is there any way I can reset the machine to its factory reference points? It's hard to imagine the sub-spindle head shifted from its place from the collision, or did it ?!
    I have attached two pictures showing the unalignment between the sub-spindle and backwork toolpost.
    The machine is a Tornos Swiss Gt13 with Fanuc 32i
    Is this an mechanical problem or can it be solved by reseting something.

    Attached Thumbnails Attached Thumbnails CNC Crash-whatsapp-image-2019-08-23-19-07-a   CNC Crash-whatsapp-image-2019-08-24-16-00-a  


  2. #2
    CNCINDUSTRY's Avatar
    Join Date
    Aug 2019
    Location
    guangzhou
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default

    For the CNC machines, crash is inevitable. I suppose that 0.25mm or 0.36mm apart is not a big deal. The mechanical structure should not have been damaged. Please check your manual, there must be a way to realignment. Or ask for help from your supplier.



  3. #3
    Member
    Join Date
    Aug 2006
    Location
    usa
    Posts
    155
    Downloads
    0
    Uploads
    0

    Default Re: CNC Crash

    i have seen sub spindles twist from collisions before, you can also twist the rails but that is less common. check for twist by taking a known good collet and precision pin and check for straightness. i'm not sure if a tornos is the same for zero points but a tsugami is zero'd off the guide bushing. so basically you align it with the guide bushing, set the 1815 apz parameter on x2(whatever it is on a tornos) to 0 and back to 1 and restart the machine. but like i said that is the abridged tsugami procedure, but i would bet your manual has whatever the tornos procedure is. also there is probably an accuracy report in your electrical cabinet that outlines how to verify your alignments.



  4. #4
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    178
    Downloads
    0
    Uploads
    0

    Default Re: CNC Crash

    Quote Originally Posted by Perverson View Post
    Is this an mechanical problem or can it be solved by reseting something.
    To my knowledge the production machine you have was designed and assembled with 'precision' in mind. It needs to be re-trammed and re-aligned by the manufacturer's tech to be brought back to specs. They have proprietary tools & sensors for this task (its quick). Unless you know exactly what you are doing and/or have been trained by the mfg, I wouldn't attempt alignment mods as this could potentially make things much worst than it is.

    It'd be a different story for let's say... a SIEG X2 mini-mill, obviously.

    Sorry to hear about your mishap and best of luck.



  5. #5
    Perverson's Avatar
    Join Date
    Apr 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Hello, thank you for all the replies!
    What kind of equipment would it be needed to do such a re-alignment ?



  6. #6
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2793
    Downloads
    0
    Uploads
    0

    Default Re: CNC Crash

    hi / you need a centro an/or test indicator, and the location of all adjustment screws; after alignment, you may need to zero the axis, and to re-store the soft travel limits

    if possible, try to call someone who knows your machine; i don't have experience with it / kindly

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC Crash

CNC Crash

CNC Crash