Nomura NN13 lathe questions?


Results 1 to 6 of 6

Thread: Nomura NN13 lathe questions?

  1. #1

    Default Nomura NN13 lathe questions?

    Hi All we recently purchased a Nomura NN13 sb2 lathe. The machine is missing the guide bushing and all related parts. Does anybody know what guide bushing this machine takes? According to the parts list I have it should be a p10 guide bush, however all of the collet manufactures tell me it should be a p16 guide bushing. I think it would be weird that the machine would take a 10mm bush if the spindle is 13mm through.


    Thanks.

    Similar Threads:


  2. #2
    Registered cincron's Avatar
    Join Date
    Jun 2005
    Location
    United States
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Re: Nomura NN13 lathe questions?

    Hardinge calls them P16. Some others call it P1653C (collet) and P1653D (guide bushing). At least that's what my NN13 takes.

    ~Kilroy~


  3. #3

    Default

    Would either of you happen to have the setup program and O9801 macro the nomura program manual calls out ? I recently got a NN13 with a dead battery and had to reload everything . I’m new to Swiss and Trying to program by following nomura manuals.



  4. #4

    Default Re: Nomura NN13 lathe questions?

    I have the machine parameters in pdf form some where, but its all in Japanese so if I lose my battery im going to have to hire a translator.



  5. #5

    Default Re: Nomura NN13 lathe questions?

    alloy craft I was in the same boat . my machine came with a dead battery . google translator worked wonders and its free



  6. #6

    Default Re: Nomura NN13 lathe questions?

    im trying to figure out how to program this machine by following the program manual . my problem is I didn't have the O9801start position program . some nice people on here gave me there copy off there machine but all 3 were different . im new to swiss and having a hard time wraping my head around starting position .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Nomura NN13 lathe questions?

Nomura NN13 lathe questions?

Nomura NN13 lathe questions?