Deep Drilling on Citizen L20



Results 1 to 3 of 3

Thread: Deep Drilling on Citizen L20

  1. #1
    Member
    Join Date
    Mar 2009
    Location
    US
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Deep Drilling on Citizen L20

    Hi Guys. Anybody ever use the Z2 axis for T2100-T2300 on an L20 to drill back through the guide bushing? I am drilling a 6" deep hole and I'm trying to get a better result with run-out. My thought was to advance the drill (T2300), drill using the Z2 axis maybe an inch or so beyond the face of the guide bushing, then drill the remainder using Z1. Note sure exactly how to code it though.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Deep Drilling on Citizen L20

    What size hole? What material? I recently drilled a hole 5.25 deep in 303 ss. Can't remember dia. exactly, but was over .200. I can post the program if you'd like. Used Guhring drills - pilot drill, then long drill. When going to long drill, slow RPM, slow feed, no coolant. Once drill is in pilot hole, turn on high pressure, bring up RPM, and go. I used 2 or 3 pecks. I'll post it tomorrow for you. ------------------- John



  3. #3
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Deep Drilling on Citizen L20

    Deep Hole Drilling - Pilot drill .800 deep first (I used a GDF Block from Gang)

    G610

    T2200 S-3.0465 (5.5MM GUHRING)
    M3 S1=500
    G0 X0 Z0 T22
    G1 Z.600 F100.
    M64(ON) - I rigged high pressure from set screw hole
    S1=7600
    Z1.8 F.0042
    G0 Z.6
    Z1.7
    G1 Z2.8
    G0 Z.6
    Z2.7
    G1 Z3.8
    G0 Z.6
    Z3.7
    G1 Z4.785
    S1=500
    G0 Z.6
    M5
    M64(OFF)
    Z-.1 T0
    G600
    G630

    HTH! -------------- John



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Deep Drilling on Citizen L20

Deep Drilling on Citizen L20