Need Help! Citizen Prep page, increasing diameter value


Results 1 to 4 of 4

Thread: Citizen Prep page, increasing diameter value

  1. #1
    Registered
    Join Date
    Nov 2011
    Location
    US
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Citizen Prep page, increasing diameter value

    I have a straddle knuler that sits well below my turning tools on the change. I need to make the dia on the prep page larger then the 2.0 value the machine currently allows. Anyone knows how to change this parameter or work around this issue? I know the gang will come up higher, since it has to for tools 11-14 on the dogleg.

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2014
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Citizen Prep page, increasing diameter value

    Use man set and increase the dia value



  3. #3
    Member
    Join Date
    Apr 2017
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Citizen Prep page, increasing diameter value

    Use a G50U- shift once your tool is called up in the program. This will allow you to exceed the 2.0 that your machine is limited to. Just don't do a Position Point with your stock hanging out of the GB or you will crash.



  4. #4
    Member
    Join Date
    Feb 2011
    Location
    usa
    Posts
    258
    Downloads
    2
    Uploads
    0

    Default Re: Citizen Prep page, increasing diameter value

    there is a value you can change to let you use more than 2.00 in the prep page
    i am not at work now but will try and find the procedure to let you do this ( i have done it on a a20 vi and a20 vii) if this will help you



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Citizen Prep page, increasing diameter value

Citizen Prep page, increasing diameter value

Citizen Prep page, increasing diameter value