Need Help! Citizen Prep page, increasing diameter value



Results 1 to 4 of 4

Thread: Citizen Prep page, increasing diameter value

  1. #1
    Registered
    Join Date
    Nov 2011
    Location
    US
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Citizen Prep page, increasing diameter value

    I have a straddle knuler that sits well below my turning tools on the change. I need to make the dia on the prep page larger then the 2.0 value the machine currently allows. Anyone knows how to change this parameter or work around this issue? I know the gang will come up higher, since it has to for tools 11-14 on the dogleg.

    Similar Threads:


  2. #2

    Default Re: Citizen Prep page, increasing diameter value

    Use man set and increase the dia value



  3. #3

    Default Re: Citizen Prep page, increasing diameter value

    Use a G50U- shift once your tool is called up in the program. This will allow you to exceed the 2.0 that your machine is limited to. Just don't do a Position Point with your stock hanging out of the GB or you will crash.



  4. #4
    Member
    Join Date
    Feb 2011
    Location
    usa
    Posts
    353
    Downloads
    2
    Uploads
    0

    Default Re: Citizen Prep page, increasing diameter value

    there is a value you can change to let you use more than 2.00 in the prep page
    i am not at work now but will try and find the procedure to let you do this ( i have done it on a a20 vi and a20 vii) if this will help you



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Citizen Prep page, increasing diameter value

Citizen Prep page, increasing diameter value