There is not a 3D chamfer operation. Either do a 3axis Cut with a ball end mill or do a 3axis Project of a 2axis path. I would need a file to look at to advise further.
I can not figure out how to do 3D chamfers Surfcam Traditional. It is kicking my but. Please let me know how you do it.
Similar Threads:
There is not a 3D chamfer operation. Either do a 3axis Cut with a ball end mill or do a 3axis Project of a 2axis path. I would need a file to look at to advise further.
Not pencil cut - just Cut -
You would need to create surface geometry of your chamfer. In SolidWorks the software creates a separate surface which is your chamfer. ONce you have a surface(s) those are your chamfer(S) then you just use a small end mill like a ball or bull nose and machine the surface(s), just as you would any other surface.